No. 351 & 351SW Electric Label Dispenser

Maximum label width: 5 1/4" inches, rolls or fan-fold
Maximum roll diameter: 12 inches

Counter Space:
    No. 351 - 7" x 14"
    No. 351SW 7" x 22"

Electrical: 115VAC, 60 Hz

Shipping Weight:
    No. 351 - 12 lb.
    No. 351SW - 13 lb.

No. 351 Electric Label Dispenser

Dispenses pressure sensitive labels of any length, up to 5 1/4 inches wide. As a label is taken from the machine, the next label advances automatically.

Label feed is controlled by a photoelectric sensor. Since the label does not touch the sensor, the No. 351 is especially well suited for dispensing small, fragile, or irregular-shaped labels.

Control switch has two positions:

• AUTOMATIC - As a label is lifted from the machine, the roll advances until the following label projects over the photo cell, then stops. Cycle repeats as the next label is taken.
• MANUAL - Labels advance as long as the switch is pressed.

Solid metal construction with smooth powder coat finish. Heavy gauge top plate permits stamping or writing on labels as they are dispensed.

No. 351SW Electric Label Dispenser

Identical to the No. 351, but has a scrap rewinder mounted at the rear to collect the carrier sheet as labels are dispensed.